SL-T47 ASTM D3574 Foam Permanent Compression Tester

Product introduction

Permanent Compression Tester is for Rubber Static Compression Test
Permanent compression of the degree of distortion tester to take the standard test pieces, sandwiched between the flat panel, the screw rotation, compression to a certain rate, and then into a certain temperature of the oven (optional),
after the specified time to remove, remove Test pieces, cooling for 30 minutes, measuring the thickness, into the formula for compression distortion. Clamp specimens between metal plates by tighten nuts to apply a certain pressure
for a required period, place the device with specimen in a oven with required temperature for a required period, specimens were taken out and cooled for 30 minutes, the final thickness is measured for calculating the recovery performance of specimen.

Application

It is mainly used for baking, drying, heat treatment and thermal processing of items, agricultural production, scientific research, medical and health units, and laboratory experiments. It is suitable for drying, baking, baking, drying, baking, It is used for wax melting, sterilization, drying and disinfection, and can also be used for general constant temperature tests.

Test Standard

ASTM D 3574 Test D;

ASTM D 3574 Aging Test K;
ISO 1856

Technical parameters

Test Specimen