Mask Flame Retardant Tester​

Mask Flame Retardant Tester

Product Introduction

This mask flame retardant tester is developed according to GB2626 and is used to test the fire retardant performance of masks. The applicable standards are: GB2626 GB19082 GB19083 GBT32610 YY0469 YYT0969, etc.

Technical parameters

1. The mask head mold is made of metal and simulates human facial features according to the ratio of 1: 1.

2.Burner height adjustable

3.Automatic positioning timing

4. Display afterflame time

5. Equipped with flame sensor

6. Head mold moving speed (60 ± 5) mm / s

7.Diameter of flame temperature detection needle 1.5mm

8. Flame temperature adjustment range 750-950 ℃

9. Accuracy of afterburning time 0.1S

10.Power source 220V 50HZ

11.Gas: propane or liquefied petroleum gas

Operation interface introduction

Test interface

Positioning: Click on the head mold to stop above the torch to adjust the direct distance between the torch and the head mold

Run: The head mold starts to move toward the torch and stops after reaching the other position

Exhaust: open and close the exhaust fan on the box

Gas: Open and close the gas passage

Ignition: start high pressure ignition

Lamp: Turn on and off the lighting inside the box

Save: Save the test data after the test is completed

Timer: Recording the after burning time