Paper Gypsum Board Fire Stability Tester

Paper Gypsum Board Fire Stability Tester (Combustion Test Machine) 

Application

Suitable for thermal stability of paper gypsum board in case of fire

Standard:  GB/T9775-99

Technical Parameters
The tester consists of an experimental design consisting of a test part and a control part.
The test casing and important parts are made of stainless steel, which is resistant to smoke and gas. The control system is highly automated,
With automatic ignition function, temperature and time digital display, observation and record are easy to use, stable and reliable.
Power supply: AC220V±10%/50Hz (other power supply specifications can be specified)
The gas source of the test flame is gas or petroleum liquefied gas (it is recommended to use a gas with better temperament if conditions permit)
Double burner with inner diameter of Φ9.5mm±0.5mm and length of about 100mm with air conditioning holes. Easy to adjust flame length, adjustable from 20mm to 100mm
The flame application time and the holding time can be adjusted within the range of 0 to 99 minutes and 99 seconds, and the test process is automatically controlled.
Body volume 0.05m3 Dimensions (mm) 610 (width) × 350 (deep) × 650 (height)