Do you sometimes feel troubled by buying some textile products such as worn
and pilled clothes and pants? I believe this kind of thing is very common in our
daily life. At this time, manufacturers need to strictly control their #quality, take
the Martindale abrasion and pilling test for their own products, Martindale Abrasion
and Pilling Tester can check the abrasion and pilling ability of various textile products,
which can reduce the flow of unqualified textile products into the market.
SL-F04 Martindale Abrasion and Pilling Tester
Product Introduction
This tester can check the abrasion and pilling capability for various textile products.
1. Samples are rubbed against known abradant at low pressures, its degree of abrasion
and pilling can be compared with standard parameter evaluation.
2. The instruments used movable fastening components of the sample, you can always
check out a sample of friction without affecting the other specimen
3. Not only does the sample quickly, but independent testing also guarantees friction over
the accuracy of measurement BSEN ISO12947-1: 1999 recognized fastening methods.
4. The tester is equipped with an electronic preset batch counter, timer, and pooled
sample clips and load device (compatible with international testing standards)
Provides 4, 6, head of the model.
Principle
Under the specified pressure, the circular specimen is rubbed with the same fabric or
wool fabric abrasive fabric for a certain number of times with the Lissajous pattern
trajectory, and the wear resistance and the pilling performance of the specimen
are examined.
According to the standard
This tester is manufactured according to ISO 12947-1~3, ISO 12945-2, GB/T 21196.1~4,
ASTM D4966, and other standards.
Technical parameters
Project
Specification
Test station
4 stations
Wear resistance stroke
60.5±0.5mm
Pilling stroke
24±0.5mm
Test speed
External wheel: 47.5±2.5r/min, inner wheel: 44.5±2.4r/min
Test pressure Wear resistance
595 ± 7g / 795 ± 7g, hairball: 415 ± 2g
Flattening weight
2.5±0.5kg, diameter 120±10mm
Controller
PLC touch screen control
Volume (WxDxH)
48x50x36cm
Weight (approx.)
≈50Kg
Power Supply
1∮ AC 220V 3A