Fabric Vertical Flammability Tester

Fabric Vertical Flammability Tester

Product introduction

Fabric Vertical Flammability Tester is applicable to all kinds of textile material of flammability test;

Suitable for single component or multi-component (coating, quilting, multilayer, laminated products and similar combination) clothing, including cold tent curtain antependium and large tent and door cover textiles vertical flame spread to the determination of performance;
Suitable for surface with hairs (such as raising, terry, tufted or similar) on the surface of the textile fabric burning time determination;
Suitable for all kinds of single layer or multi-layer (such as coating, quilting, interlayer and similar combination) the fabric of the vertical direction of the ease of ignition tests;
In the laboratory test results can only be used for evaluation of control under the condition of material or combination of combustion performance. Enough oxygen to test results do not apply to the occasion or heating time is too long in the fire.

Principle
Install the finished product sample or material sample on the corresponding fixture of the instrument, with the requirements of the flame sample time, record the related data (e.g., burning time, burning rate), to evaluate its combustion performance.

Technical parameters

BS EN ISO 6940,EN ISO 6941

How do you test the Flammability of fabric?

In the US flammability test, a standard flame 5/8 of an inch long is lowered onto the fabric specimen, which is from a garment or production fabric, at a 45 angle for one second. This configuration is used to approximate the position of fabric during wearing.