16 CFR 1611 Vinyl Plastic Film Flammability Tester

Product Model : SL-FL091

SPI Flammability Tester, to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 - U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film.

Inquire Now

Detailed description

16 CFR 1611 Vinyl Plastic Film Flammability Tester ,SPI Flammability Tester

Product introduction

The rate of burning shall not exceed 1.2 in./s as judged by the average of five determinations lengthwise and five determinations transverse to the direction of processing, when specimen is placed at an angle of 45 degree and expose to the standardized flame (22# fire nozzle, 1/2 inch. In length).

Specifications

The most advanced thread locking device and sample holder save 80% of operation time that faster than other suppliers’ design

Equipped with photoelectricity sensor accurately and automatically record burning time with no damage ensures 5 years life or longer

Timer accuracy up to 0.01 second;

22# needle flame, 9/16inch from the specimen, flame length adjusted by flow-valve;

Technical parameters

Test box 30cmX25cmX37cm, 5pcs x 20mm vents on the left and right sides

The nozzle is 9/16" from the surface of the sample"

Gas butane

Timing distance of burning	6 inch
Sample holder	45°
Marker line spacing	6”
Flame length	1/2"
Sample size	3”x9”
Volume (WxDxH)	46x29x52cm
Weight (approx.)	≈20Kg
Power supply	1∮ AC 220V 50Hz 3A
Standards	CFR 16 Part 1611