Details of the inspection of a pair of qualified shoes.

1. Damage: 1. Whether the toe cap, the outer side of the middle help, and the front eye protection display surface of the finished shoe are damaged; 2. The inner side of the middle help, etc., and the non-display surface should not have damage with an area exceeding 2 square millimeters; 3. The back neckline, The tongue should not be damaged; 4. The sewing machine should not have a broken place, and the tongue label should not be damaged; 5. The outsole is damaged and lacks material, the length exceeds 1mm and the width is 1.5mm unqualified; 6, the shoelace is damaged and unqualified.

2. Firmness: 1. The tongue of the shoe must be fixed firmly and must not fall off; 2. The webbing must be fixed firmly and must not fall off; 3. Drop plastic, trademarks, and letters must not fall off; 4. Eagerly and firmly must not fall off; Transfer or cloth scale size, must not fall off 6, the parts of the car line should not fall off; 7, the metal buckle is broken and deformed, loose, no bottom buckle, and the paint is not qualified; 8, the plastic drop buckle is not strong, easy to pull off, Unqualified; 9, the outsole label connection is not strong and unqualified; 10, the sole combination is not strong and the delamination is unqualified.

3. Glue opening: 1. The finished shoes are not over 2mm long and 1.5mm deep, only the glue opening area; 2, the outsole and the upper surface are firmly bonded, without cracks and voids; 3, the tensile test is 2.5 kg / Above per square cm.

4.size: 1, the left and right feet are the same size; 2, the actual size (length) of the shoes is the same, and the size of the lining and the midsole is the same.

5.sewing thread: 1. Any part, the sewing machine is unqualified, and the bottom thread is unqualified; 2. The sewing machine is unqualified when the needle is dropped; 3. Double-needle wiring, heavy needles, cross-threading, serious uneven line spacing, unevenness and poor flow Qualified; 4. The stressed part, the bottom thread of the main components, is generally too loose, and the upper thread is unqualified; 5. The margin and stitch distance are seriously uneven, the line is not smooth, which seriously affects the appearance, and is unqualified; 6. The car line is left and right The color of the feet is wrong, and the single needle and double needle thread are not qualified.

6.chromatic aberration: 1. Symmetrical parts of a single upper face, symmetrical parts of the left and right feet of the whole pair of shoes, no chromatic aberration; 2. No chromatic aberration between the left and right feet of the outsole. Color difference; 3. Accessories, such as trademarks, ribbons, plastic drops, electro-rust, high frequency, and printing are not allowed to have serious color differences.

7. Length: 1. The length of the front is over 2mm unqualified; 2, the exposed length of the tongue is over 3mm unqualified; 3, the outsole is over 3mm long; 4, the shoelace ends are over 2cm long.

• ·SATRA TM77 Shoe Bending Waterproof Testing Machine
• ·SATRA TM3 Midsole Fiberboard Bending Test Machine
• ·SATRA TM21 Heel Continuous Impact Testing Machine
• ·SATRA TM172 Leather Permeability Testing Machine
• ·SATRA PM173 Leather Fastness Tester
• ·Button Press Test Machine with 4 stations